D-Link DXS-3600 Series Reference Manual page 220

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured in OSPF Area Settings are described below:
Parameter
VRF
OSPF Area ID
Range
NSSA
Stub
Area Range IP
Area Range Mask
Advertise
Click the Delete button to delete an entry based on the information entered.
Click the Apply button to accept the changes made.
The fields that can be configured in OSPF Area Table are described below:
Parameter
VRF
Click the Find button to locate a specific entry based on the information entered.
After clicking the Select VRF button, the following page will appear.
Figure 6-55 OSPFv2 Area Settings Window
Description
Enter the VRF instance's name that will be used here. This name can
be up to 12 characters long. Alternatively, click the Select VRF button
to open a new window to select and use a configured VRF instance
from the list.
Enter the OSPFv2 area ID here. The area will be created on an
interface if the subnet configured on the interface falls in the range of
the network specified here.
Select this option to summarize OSPF routes at an area border router.
Select this option to assign the OSPF area as a Not-So-Stubby Area
(NSSA) area.
Select this option to specify an OSPF area as a stub area.
Enter the OSPF area range's IP address here.
Enter the OSPF area range's subnet mask here.
Select the advertise option here. Options to choose from are
Advertise and No-Advertise.
•
Advertise: Specifies to advertise a Type-3 summary LSA for the
specified range of addresses.
•
Not-Advertise: Specifies to suppress the advertising of Type-3
summary LSAs. Component routes are still hidden behind it.
Description
Enter the VRF instance's name that will be used here. This name can
be up to 12 characters long. Alternatively, click the Select VRF button
to open a new window to select and use a configured VRF instance
from the list.
209