Configuration Fundamentals; Accessing The Command Line; Cli Modes - Dell S6100 Configuration Manual

The Dell Networking Operating System (OS) command line interface (CLI) is a text-based interface you can use to configure interfaces and
protocols.
The CLI is largely the same for each platform except for some commands and command outputs. The CLI is structured in modes for
security and management purposes. Different sets of commands are available in each mode, and you can limit user access to modes using
privilege levels.
In the Dell Networking OS, after you enter a command, the command is added to the running configuration file. You can view the current
configuration for the whole system or for a particular CLI mode. To save the current configuration, copy the running configuration to
another location.
NOTE: Due to differences in hardware architecture and continued system development, features may occasionally differ between
the platforms. Differences are noted in each CLI description and related documentation.
Topics:
•

Accessing the Command Line

•

CLI Modes

• The do Command
• Undoing Commands
• Obtaining Help
• Entering and Editing Commands
• Command History
• Filtering show Command Outputs
• Multiple Users in Configuration Mode
Accessing the Command Line
Access the CLI through a serial console port or a Telnet session.
When the system successfully boots, enter the command line in EXEC mode.
NOTE: You must have a password configured on a virtual terminal line before you can Telnet into the system. Therefore, you must
use a console connection when connecting to the system for the first time.
telnet 172.31.1.53
Trying 172.31.1.53...
Connected to 172.31.1.53.
Escape character is '^]'.
Login: username
Password:
Dell>
CLI Modes
Different sets of commands are available in each mode.
A command found in one mode cannot be executed from another mode (except for EXEC mode commands with a preceding do command
(refer to the do Command section).

Configuration Fundamentals

Configuration Fundamentals
2
33