Default Configuration There Is No Default Configuration For This Command; Command Mode Privileged Exec Mode; User Guidelines; There Are No User Guidelines For This Command - Dell PowerConnect M6348 Cli Reference Manual

Designated Router..............................
FE80::2FF:EDFF:FED0:2
DR Priority.................................... 1
BSR Border..................................... Disabled

show ipv6 pimsm neighbor

Use the show ipv6 pimsm neighbor command to display IPv6 PIMSM neighbors learned on the
routing interfaces.
Syntax
vlan-id
show ipv6 pimsm neighbor [ all | interface vlan ]
vlan-id — A valid VLAN ID value.
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode

User Guidelines

There are no user guidelines for this command.

Example
console#show ipv6 pimsm neighbor all
Slot/Port...................................... vlan 6
Neighbor Address...............................
FE80::200:FF:FE00:33
Up Time (hh:mm:ss)............................. 00:00:12
Expiry Time (hh:mm:ss)......................... 00:01:34
DR Priority.................................... 0

show ipv6 pimsm rphash

Use the show ipv6 pimsm rphash command to display which rendezvous point (RP) is being
selected for a specified group.
660