Table of Contents
Advertisement
User Guidelines
Use the
show ip dhcp pool
parameters. Up to eight name server addresses may be specified. The
NetBIOS WINS information is conveyed in the Option 44 TLV of the DHCP
OFFER, DCHP ACK, DHCP INFORM ACK and DHCP BOOTREPLY
messages.
Example
console(config-dhcp-pool)#netbios-name-server 192.168.21.1 192.168.22.1
netbios-node-type
Use the netbios-node-type command in DHCP Pool Configuration mode to
set the NetBIOS node type for a Microsoft DHCP client. Use the no form of
the command to remove the netbios node configuration.
Syntax
netbios-node-type type
no netbios-node-type
type—The NetBIOS node type can be b-node, h-node, m-node or p-node.
•
Default Configuration
There is no default NetBIOS node type configured.
Command Mode
DHCP Pool Configuration mode
User Guidelines
Use the
show ip dhcp pool
parameters. The NetBIOS node type information is conveyed in the Option
46 TLV of the DHCP OFFER, DHCP ACK, DHCP INFORM ACK and
DHCP BOOTREPLY messages. Supported NetBIOS node types are:
•
broadcast (b-node)
•
peer-to-peer (p-node)
•
mixed (m-node)
command to display pool configuration
command to display pool configuration
Switch Management Commands
1910
Advertisement
Table of Contents
