Show Debugging; Exception Switch-Chip-Register - Dell Networking 2024 Reference Manual

console(config)#exception protocol usb
console(config)#do dir usb
Filename
.
..
test.bin
Total Size: 1002160128
Bytes Used: 16384
Bytes Free: 1002143744

exception switch-chip-register

Use the exception switch-chip-register command to enable dumping the
switch chip registers in case of an exception. The register dump is taken only
for the master unit and not for the stack member units. Use the no form of
the command to disable dumping of the switch-chip registers.
Syntax
exception switch-chip-register
no exception switch-chip-register
Default Configuration
By default, switch register dumps are disabled.
Command Modes
Global Configuration mode
User Guidelines
This option should only be used under the direction of Dell support
personnel.
Switch registers are captured to the local file system.

show debugging

Use the show debugging command to display packet tracing configurations.
Filesize
16384
0
11
Serviceability Tracing Packet Commands
Modification Time
01/01/1970 00:00:00
06/24/2013 17:14:30
01/01/1980 00:00:00
1591