Show Cpu-Traffic-Stats - Dell Force10 S4810P Reference Manual

Command History
Version 7.5.1.0
E-Series
Usage
Information

show cpu-traffic-stats

View the CPU traffic statistics.
C-Series, E-Series, S-Series, Z-Series
Syntax show cpu-traffic-stats [port number | all | cp | linecard {all
| slot# } | rp1 | rp2 ]
Parameters
port number
all
cp
linecard
rp1
rp2
Defaults all
Command Modes EXEC
148
Introduced on the C-Series.
Original command.
CAUTION: Use this command only when you are working directly with a technical support
representative to troubleshoot a problem. Do not use this command unless a technical
support representative instructs you to do so.
(OPTIONAL) Enter the port number to display traffic statistics on that
port only. Range: 1 to 1568.
(OPTIONAL) Enter the keyword all to display traffic statistics on all
the interfaces receiving traffic, sorted based on the traffic.
(OPTIONAL) Enter the keyword cp to display traffic statistics on the
specified CPU.
NOTE: This option is supported on the E-Series only.
(OPTIONAL) Enter the keyword linecard followed by either all or
the slot number to display traffic statistics on the designated line
card.
NOTE: This option is supported on the C-Series only.
(OPTIONAL) Enter the keyword rp1 to display traffic statistics on the
RP1.
NOTE: This option is supported on the E-Series only.
(OPTIONAL) Enter the keyword rp2 to display traffic statistics on the
RP2.
NOTE: This option is supported on the E-Series only.