Show Cpu-Traffic-Stats - Dell Z9500 Command Reference Manual

Usage
Information

show cpu-traffic-stats

View CPU traffic statistics.
Z9500
Syntax
show cpu-traffic-stats [cp | rp | linecard {slot-id]
Parameters
cp
rp
linecard slot-id
Defaults Display CPU traffic statistics for all Z9500 CPUs (Control Processor, Route
Processor, and line cards).
Command EXEC
Modes
Example
Dell#show cpu-interface-stats
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
7.6.1.0
140
CAUTION: Use this command only when you are working directly with a
technical support representative to troubleshoot a problem. Do not use this
command unless a technical support representative instructs you to do so.
Enter the keyword cp to display traffic statistics on the
Control Processor CPU.
Enter the keyword rp to display traffic statistics on the Route
Processor CPU.
Enter the slot ID of the line card for which you want to
display traffic statistics. The range of Z9500 slot IDs is from 0
to 2. Enter linecard all to display traffic statistics for all
line cards.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the S-Series.
Control and Monitoring