Advertisement
Example
The following example displays entries in the ARP table.
console# show arp
ARP timeout: 60000 Seconds
Interface
----------
g11
g12
ip domain-lookup
The ip domain-lookup Global Configuration mode command enables the IP Domain Naming
System (DNS)-based host name-to-address translation. To disable the DNS, use the no form of
this command.
Syntax
ip domain-lookup
no ip domain-lookup
Default Configuration
DNS lookup is enabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example enables the IP Domain Naming System (DNS)-based host name-to-address
translation.
console(config)# ip domain-lookup
ip domain-name
The ip domain-name Global Configuration mode command defines a default domain name, that
the software uses to complete unqualified host names (names without a dotted-decimal domain
name). To disable use of the Domain Name System (DNS), use the no form of this command.
144
IP Addressing Commands
IP address
----------------
10.7.1.102
10.7.1.135
HW address
------------------
00:10:B5:04:DB:4B
00:50:22:00:2A:A4
Status
--------
Dynamic
Static
Advertisement
