Toyota T100 1996 Service Manual page 1804

SUPPLEMENTAL RESTRAINT SYSTEM
Connector 1
Center Airbag
Sensor Assembly
No.
(1) Terminal Twin−Lock Mechanism
(2) Airbag Activation Prevention Mechanism
(3) Electrical Connection Check Mechanism
(4) Connector Twin−Lock Mechanism
Spacer
Housing
Female
1996 TOYOTA T100 (RM449U)
5.
The front airbag sensor is mounted inside each of the front
members. The sensor unit is a mechanical type. When the sen-
sor detects deceleration force above a predetermined limit,
contact is made in the sensor, sending a signal to the airbag
sensor assembly. The sensor cannot be disassembled.
6.
R08038
Connector 2
Item
(a)
Male
Z05953
− SRS AIRBAG
FRONT AIRBAG SENSOR
SRS CONNECTORS
No.1 J/B
Connector 3
Spiral Cable
Connectors 2, 3, 4
Connectors 1, 3, 4
Connectors 1, 5
Connectors 3, 4
All connectors in the SRS are colored yellow to distin-
guish them from other connectors. Connectors having
special functions and specifically designed for the SRS
are used in the locations shown above to ensure high reli-
ability. These connectors use durable gold−plated termi-
nals.
(1) Terminal Twin−Lock Mechanism
Each connector has a two−piece component con-
sisting of a housing and a spacer. This design se-
cures the locking of the terminal by two locking de-
vices (the retainer and the lance) to prevent
terminals from coming out.
Connector 4
Squib
Rh and LH Front
Airbag Sensor
Connector 5
Application
RS−3
H03005