Toyota T100 1996 Service Manual page 1828

REMOVAL
NOTICE:
If the wiring connector of the SRS is disconnected with the ignition switch at ON or ACC posi-
S
tion, DTCs will be recorded.
Never use SRS parts from another vehicle. When replacing parts, replace them with new ones.
S
Never reuse the sensor involved in a collision when the SRS has been deployed.
S
Never repair a sensor in order to reuse it.
S
1. REMOVE THESE PARTS:
(a) Battery
(b) Air cleaner assembly
2. REMOVE FRONT AIRBAG SENSOR
(a) Disconnect the connector.
(b) Using a torx wrench, loosen the 2 screws and the sensor.
Torx wrench: T40 (Part No. 09042−00020 or locally manufactured tool)
1996 TOYOTA T100 (RM449U)
SUPPLEMENTAL RESTRAINT SYSTEM − FRONT AIRBAG SENSOR
RS−27
RS03V−01