Toyota T100 1996 Service Manual page 1811

RS−10
1996 TOYOTA T100 (RM449U)
SUPPLEMENTAL RESTRAINT SYSTEM − STEERING WHEEL PAD AND SPIRAL CABLE
There should be no interference between the steering
S
wheel pad and steering wheel, and the clearance should
be uniform all the way around when the new steering
wheel pad is installed on the steering wheel.
CAUTION:
For removal and installation of the steering wheel pad, see
the SR section and be sure to follow the correct procedure.
3. VEHICLE INVOLVED IN A COLLISION AND AIRBAG IS
DEPLOYED
(a) Do a diagnostic system check.
(See page DI−365)
(b) Do a visual check which includes the following items with
the steering wheel pad (with airbag) removed from the ve-
hicle.
Check for the deformation on the horn button con-
S
tact plate of the steering wheel.
Check for the damage to the spiral cable connector
S
and wire harness.
HINT:
If the horn button contact plate of the steering wheel is de-
S
formed, never repair it. Always replace the steering wheel
assembly with a new one.
There should be no interference between the steering
S
wheel pad and steering wheel, and the clearance should
be uniform all the way around when the new steering
wheel pad is installed on the steering wheel.