REPLACEMENT
In the following cases,replace the wire harness or connector.
If any part of the SRS wire harness or any connector has been found to be faulty in troubleshoot-
S
ing.
If any part of the SRS wire harness or any connector has been found to be faulty during the check
S
in items (See page RS−32).
CAUTION:
If the wire harness used in the SRS is damaged, replace the whole wire harness assembly.
S
When the connector to the front airbag sensors can be repaired alone (when there is no damage
S
to the wire harness), use the repair wire specially designed for this purpose.
1996 TOYOTA T100 (RM449U)
SUPPLEMENTAL RESTRAINT SYSTEM
−
WIRE HARNESS AND CONNECTOR
RS−33
RS041−01