Toyota T100 1996 Service Manual page 1823

RS−22
1996 TOYOTA T100 (RM449U)
SUPPLEMENTAL RESTRAINT SYSTEM − AIRBAG SENSOR ASSEMBLY
REMOVAL
NOTICE:
Do not open the cover or the case of the ECU and various
computers unless absolutely necessary. (If the IC termi-
nals are touched, the IC may be destroyed by static elec-
tricity.)
1. REMOVE THESE PARTS:
(a) Lower center cover
(b) Cruise control ECU
2. REMOVE AIRBAG SENSOR ASSEMBLY
(a) Disconnect the connector.
NOTICE:
Removal of the connector is done with the sensor assem-
bly installed.
(b) Using a torx wrench, remove the 3 screws and the airbag
sensor assembly.
Torx wrench: T40 (Part No. 09042−00020 or locally
manufactured tool)
RS03Q−03