Dell PowerEdge M420 Reference Manual page 222

list-name — Character string used to name the list of authentication
•
methods activated when a user logs in. (Range: 1-15 characters)
method1 [ method2 ...] — Specify at least one from the following table:
•
Keyword
enable
line
local
none
radius
tacacs
Default Configuration
The default login lists are defaultList and networkList. defaultList is used by
the console and only contains the method none. networkList is used by telnet
and SSH and only contains the method local.
Command Mode
Global Configuration mode
User Guidelines
The default and optional list names created with the aaa authentication
login command are used with the login authentication command. Create a
list by entering the aaa authentication login
a particular protocol, where
method
this list. The
authentication algorithm tries, in the given sequence.
The additional methods of authentication are used only if the previous
method returns an error, not if there is an authentication failure. Only the
RADIUS or TACACS+ methods can return an error. To ensure that the
authentication succeeds even if all methods return an error, specify none as
the final method in the command line. For example, if none is specified as an
authentication method after radius, no authentication is used if the RADIUS
server is down.
222
AAA Commands
Source or destination
Uses the enable password for authentication.
Uses the line password for authentication.
Uses the local username database for authentication.
Uses no authentication.
Uses the list of all RADIUS servers for authentication.
Uses the list of all TACACS+ servers for authentication.
list-name
is any character string used to name
argument identifies the list of methods that the
list-name method
command for