User Guidelines
This command has no user guidelines.
Example
console#configure
console(config)#aaa ias-user username client-1
console(Config-IAS-User)#password client123
console(Config-IAS-User)#no password
Example of a adding a MAB Client to the Internal user database:
console#configure
console(config)#aaa ias-user username 1f3ccb1157
console(Config-IAS-User)#password 1f3ccb1157
console(Config-IAS-User)#exit
console(config)#
password
(Line Configuration)
Use the password command in Line Configuration mode to specify a
password on a line. To remove the password, use the no form of this
command.
NOTE:
For commands that configure password properties, see Password
Management Commands on page 1389.
Syntax
password
password
no password
password — Password for this level. (Range: 8- 64 characters)
•
•
encrypted — Encrypted password to be entered, copied from another
switch configuration.
[encrypted]
AAA Commands
231