Enable Password - Dell PowerEdge M420 Reference Manual

list-name — Uses the indicated list created with the aaa authentication
•
enable command. (Range: 1-12 characters)
Default Configuration
Uses the default set with the command aaa authentication enable.
Command Mode
Line Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example specifies the default authentication method when
accessing a higher privilege level console.
console(config)# line console
console(config-line)# enable authentication default

enable password

Use the enable password command in Global Configuration mode to set a
local password to control access to the privileged EXEC mode. To remove the
password requirement, use the no form of this command.
Syntax
enable password
no enable password
password — Password for this level (Range: 8- 64 characters).
•
• encrypted — Encrypted password entered, copied from another switch
configuration.
Default Configuration
This command has no default configuration.
226
AAA Commands
password
[encrypted]