Distance Ospf; Default-Information Originate (Ospf) - Dell Force10 S2410-01-10GE-24P Command Reference Manual

default-information originate (OSPF)

Syntax
Default
Mode
default-metric (OSPF)
Syntax
Mode

distance ospf

Syntax
Default
Mode
distribute-list out
Syntax
| OSPF Commands
430
This command is used to control the advertisement of default routes.
default-information originate [always] [metriO
The no default-information originate [metric] [metric-type] command sets the advertisement of
routes to the default.
metric—unspecified; type—2
Router OSPF Config
This command is used to set a default for the metric of distributed routes.
default-metric
1-16777215
The no default-metric command sets a default for the metric of distributed routes.
Router OSPF Config
This command sets the route preference value of OSPF in the router. Lower route preference values are
preferred when determining the best route.
distance ospf {intra | inter | type1 | type2} 0-255
The type of OSPF can be
requires that preferences must be given to the routes learned via OSPF in the following order:
intra inter type1
< < < type2
The route preference range is 0 to 255.
The no distance ospf {intra | inter | type1 | type2} command sets the default route preference
value of OSPF in the router.
intra = 8; inter = 10; type1 = 13; type2 = 150
Router OSPF Config
This command is used to specify the access list to filter routes received from the source protocol.
[no] distribute-list 1-199 out {rip | static | connected}
0-16777215
intra inter type1 type2
, , , or
.
] [metric-type {1 | 2}]
. The OSPF specification (RFC 2328)