Multicast-Router-Interface; Mode - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

mode

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

multicast-router-interface

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
mode (dense | sparse | sparse-dense);
[edit logical-systems logical-system-name protocols pim interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
pim interface interface-name],
[edit protocols pim interface interface-name],
[edit routing-instances routing-instance-name protocols pim interface interface-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure PIM to operate in sparse, dense, or sparse-dense mode.
—Operate in dense mode.
dense
—Operate in sparse mode.
sparse
—Operate in sparse-dense mode.
sparse-dense
Default: sparse
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring PIM Dense Mode Properties
Configuring PIM Sparse-Dense Mode Properties
multicast-router-interface;
[edit protocols igmp-snooping vlan vlan-id | vlan-name interface interface-name]
Statement introduced in Junos OS Release 9.1 for EX Series switches.
Statically configure an interface as a switching interface toward a multicast router (the
interface to receive multicast traffic).
Disabled.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring IGMP Snooping on EX Series Switches on page 2543
Configuring IGMP Snooping (CLI Procedure) on page 2551
Chapter 85: Configuration Statements for IGMP Snooping and Multicast
2603