Graceful-Restart; Group - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

graceful-restart

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation

group

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
2584
®
OS for EX Series Ethernet Switches, Release 10.4
graceful-restart {
disable;
restart-duration seconds;
}
[edit logical-systems logical-system-name protocols pim],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
pim],
[edit protocols pim],
[edit routing-instances routing-instance-name protocols pim]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure PIM sparse mode graceful restart.
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring PIM Sparse Mode Graceful Restart
group ip-address;
[edit protocols igmp-snooping vlan vlan-id | vlan-name interface interface-name static (IGMP
Snooping)]
Statement introduced in Junos OS Release 9.1 for EX Series switches.
Configure a static multicast group using a valid IP multicast address.
None.
ip-address —IP address of the multicast group receiving data on an interface.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring IGMP Snooping on EX Series Switches on page 2543
Configuring IGMP Snooping (CLI Procedure) on page 2551
Copyright © 2010, Juniper Networks, Inc.