Dense-Groups; Disable - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

dense-groups

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

disable

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
dense-groups {
addresses;
}
[edit logical-systems logical-system-name protocols pim],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
pim],
[edit protocols pim],
[edit routing-instances routing-instance-name protocols pim]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure which groups are operating in dense mode.
—Address of groups operating in dense mode.
addresses
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring PIM Sparse-Dense Mode Properties
disable {
interface interface-name
}
[edit protocols igmp-snooping vlan vlan-id | vlan-name]
Statement introduced in Junos OS Release 9.2 for EX Series switches.
Disable IGMP snooping on all interfaces in a VLAN or on a specific VLAN interface.
If you do not specify an interface, all interfaces in the given VLAN are disabled.
—Name of the interface.
interface-name
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring IGMP Snooping on EX Series Switches on page 2543
Configuring IGMP Snooping (CLI Procedure) on page 2551
Chapter 85: Configuration Statements for IGMP Snooping and Multicast
2577