Switches; Figure 38: Topology For Configuration - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Table 226: Components of the Topology for Connecting an Access Switch to a Distribution
Switch
Property
Access switch hardware
Distribution switch hardware
VLAN names and tag IDs
VLAN subnets
Trunk port interfaces
Access port interfaces in VLAN
access switch)
Access port interfaces in VLAN
access switch)
Copyright © 2010, Juniper Networks, Inc.

Figure 38: Topology for Configuration

Table 226 on page 1541 explains the components of the example topology. The example
shows how to configure one of the three access switches. The other access switches
could be configured in the same manner.
Settings
EX3200-24P, 24 1-Gigabit Ethernet ports, all PoE-enabled (
ge-0/0/23 ); one 4-port 1–Gigabit Ethernet uplink module (EX-UM-4SFP)
EX4200-24F, 24 1-Gigabit Ethernet fiber SPF ports (
one 2–port 10–Gigabit Ethernet XFP uplink module (EX-UM-4SFP)
, tag
sales 100
support , tag
:
sales 192.0.2.0/25
support : 192.0.2.128/25
On the access switch:
On the distribution switch:
sales (on Avaya IP telephones:
Wireless access points:
Printers:
ge-0/0/22
File servers:
(on Avaya IP telephones:
support
Wireless access points:
Printers:
ge-0/0/44
File servers:
Chapter 64: Examples: Bridging and VLAN Configuration
200
(addresses through
192.0.2.1
(addresses 192.0.2.129
ge-0/1/0
ge-0/0/0
ge-0/0/3 through ge-0/0/19
ge-0/0/0 and ge-0/0/1
and
ge-0/0/23
and
ge-0/0/20 ge-0/0/21
through
ge-0/0/25 ge-0/0/43
ge-0/0/24
and
ge-0/0/45
and
ge-0/0/46 ge-0/0/47
through
ge-0/0/0
ge-0/0/0 through ge-0/0/23
)
192.0.2.126
through 192.0.2.254 )
);
1541