Show Policy Service - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show policy service

Displays information about pending and applied policy services.
show [applied] policy service [service_name]
Syntax Definitions
applied
service_name
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Information about all policy services is displayed unless service_name is specified.
•
The display may include any of the following characters:
character definition
+ Indicates a new policy service.
- Indicates the policy service is pending deletion.
# Indicates that the policy service differs between
the pending/applied services.
Examples
-> show policy service
Service Name
telnet_service
+ftp_service
test_service
-> show policy service telnet_service
Service Name
telnet_service
-> show applied policy service
Service Name
telnet_service
test_service
page 39-182
Indicates that only services that have been applied should be displayed.
The name of the service for which you want to display information; or a
wildcard sequence of characters for displaying information about
services with similar names. Use an asterisk (*) to indicate a wildcard
character.
From IPProto
cli 6 (TCP)
cli 6 (TCP)
cli 6 (TCP)
From IPProto
cli 6 (TCP)
From IPProto
cli 6 (TCP)
cli 6 (TCP)
OmniSwitch CLI Reference Guide
QoS Policy Commands
ScrPort DstPort
23
21
21
ScrPort DstPort
23
ScrPort DstPort
23
21
November 2009