Function Overview For Subscriber Properties - Auerswald COMpact 5000 Operation Manual

The default exchange line access number on the PBX is 0 in the factory
settings; however, this can be changed. Note that changing the exchange line
access number restricts the telephone numbering plan.
For entering a sequence of phone numbers enter the first and the last phone
number under from ... until.
4. In the Name entry field, enter a name for identification purposes.
Note: The name is used for display purposes on the system telephone.
Furthermore, on some pages in the configuration manager (e.g., call data
list), the name is displayed in addition to the phone number.
5. Click Save.
6. Repeat step 2 to 5 to enter additional numbers.
Further steps:
• If required, change the automatically generated PINs and passwords (see chapter Settings
> Protection from Unauthorised Access > Configuring User PINs and Passwords).

Function Overview for Subscriber Properties

You use the function overview to configure the same function for several subscribers at the
same time.
Note: You can view the function overview in the configuration manager, on
the Subscriber (scr.) > Function overview page.
Like the Subscriber Properties, the function overview is split into tabs that deal with different
sub topics. The active tab is displayed with a white background. Click a tab to select the sub-
topic you require.
The corresponding functions are listed on each tab. Click Configure to display the subscriber
for whom the function is to be switched on/off, or set. In some functions, you can enter data or
select settings.
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
Internal Telephone Numbers
Function Overview for Subscriber Properties
Settings
583