Auto-Tensioner Removal And Installation - Honda Accord 2008 Manual

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:24:59 61TA0000_060_0071

Auto-tensioner Removal and Installation

1. Remove the chain case cover.

2. Turn the crankshaft counterclockwise to compress

the auto-tensioner.

3. Align the holes on the lock (A) and the auto-

tensioner (B), then insert a 1.2 mm (0.05 in.)

diameter pin or lock pin (P/N 14511-PNA-003) (C)

into the holes. Turn the crankshaft clockwise to

secure the pin.

NOTE: Check the auto-tensioner cam position. If the

position are not aligned, set the first cam to the first

edge of the rack.

4. Remove the auto-tensioner.

ＴＡ０８ＡＥＪＡ１４６７４３５９５２５ＫＤＡＴ００

Table of Contents