Honda Accord 2008 Manual page 190

07/11/02 09:24:56 61TA0000_060_0067
3. To hold the intake camshaft, insert a camshaft lock
pin set (P/N 07AAB-RWCA120) (A) into the
maintenance hole in camshaft position (CMP) pulse
plate A (B) and through the No. 5 rocker shaft
holder (C).
＊０３
4. To hold the exhaust camshaft, insert a camshaft
lock pin set (P/N 07AAB-RWCA120) (A) into the
maintenance hole in CMP pulse plate B (D) and
through the No. 5 rocker shaft holder (C).
5. Install the cam chain on the crankshaft sprocket
with the colored link plate (A) aligned with the mark
(B) on the crankshaft sprocket.
＊０４
B
B
C
A
6. Install the cam chain on the VTC actuator and the
exhaust camshaft sprocket with the punch marks
(A) aligned with the center of the two colored link
plates (B).
D
A
7. Install cam chain guide A and the tensioner arm (B).
A
B
B B
A
6 x 1.0 mm
12 N·m
(1.2 kgf·m,
8.7 lbf·ft)
8 x 1.25 mm
22 N·m
(2.2 kgf·m,
16 lbf·ft)
(cont'd)
＊０５
A
＊０６
6-67