Cam Chain Removal - Honda Accord 2008 Manual

07/11/02 09:24:53 61TA0000_060_0064
Cylinder Head

Cam Chain Removal

NOTE: Keep the cam chain away from magnetic fields.
1. Remove the front wheels.
2. Remove the splash shield (see step 24 on page 5-5).
3. Remove the drive belt (see page 4-31).
4. Remove the cylinder head cover (see page 6-76).
5. Set the No. 1 piston at top dead center (TDC). The
punch mark (A) on the variable valve timing control
(VTC) actuator and the punch mark (B) on the
exhaust camshaft sprocket should be at the top.
Align the TDC marks (C) on the VTC actuator and
the exhaust camshaft sprocket.
＊０１
B
6. Disconnect the VTC oil control solenoid valve
connector (A).
＊０２
6-64
10. Remove the ground cable (A), then remove the side
A
11. Remove the side engine mount bracket mounting
C
A
ＴＡ０８ＡＥＪＡ１４６７４３０００００ＫＡＡＴ１０
7. Remove the VTC oil control solenoid valve
(see page 11-325).
8. Remove the crankshaft pulley (see page 6-63).
9. Support the engine with a jack and a wood block
under the oil pan.
engine mount bracket (B).
A
bolts.
＊０３
B
＊０４