Honda Accord 2008 Manual page 188

07/11/02 09:24:54 61TA0000_060_0065
12. Remove the cam chain case (A) and spacer (B).
＊０５
13. Loosely install the crankshaft pulley.
14. Turn the crankshaft counterclockwise to compress
the auto-tensioner.
＊０６
A
B
15. Align the holes on the lock (A) and the auto-
tensioner (B), then insert a 1.2 mm (0.05 in.)
diameter pin or lock pin (P/N 14511-PNA-003) (C)
into the holes. Turn the crankshaft clockwise to
secure the pin.
NOTE: Check the auto-tensioner cam position. If the
position are not aligned, set the first cam to the first
edge of the rack.
A
16. Remove the auto-tensioner.
C
B
(cont'd)
6-65
＊０７
＊０８