Toyota Celica 2005 Repair Manual page 948

INSPECTION PROCEDURE
1 Check operation of O/D main switch
NG
2 Check and replace the combination meter (See page BE−2).
OK
3 Check O/D main switch.
5
OK
2005 CELICA (RM1131U)
DIAGNOSTICS
PREPARATION:
Turn the ignition switch ON.
CHECK:
(a)
(b)
OK:
OK
NG
PREPARATION:
Disconnect the O/D main switch connector.
CHECK:
Check continuity between terminals 5 and 6 of O/D main switch
6
connector.
OK:
Press continuously O/D main switch
D07778
NG
− AUTOMATIC TRANSAXLE (U240E)
Check O/D OFF indicator light when O/D main switch is
pushed in to ON.
Check O/D OFF indicator light when O/D main switch is
pushed again.
(a) O/D OFF indicator light lights up.
(b) O/D OFF indicator light goes off.
Proceed to next inspection shown on problem
symptoms tables (See page DI−698).
Replace the combination meter.
O/D main switch condition
Release O/D main switch
Replace and repair O/D main switch.
947
DI−747
Specified condition
Continuity
No continuity