Toyota Celica 2005 Repair Manual page 945

DI−744
INSPECTION PROCEDURE
1 Check transmission wire.
DSL
OK
2 Measure resistance between terminals DSL of ECM and body ground.
DSL
OK
Check and replace the ECM (See page
IN−30).
2005 CELICA (RM1131U)
DIAGNOSTICS
D12851
E1
D11583
− AUTOMATIC TRANSAXLE (U240E)
PREPARATION:
Disconnect the transmission wire connector.
CHECK:
Measure resistance between DSL of transmission wire and
body ground.
OK:
Resistance: 11 to 15 Ω at 20 °C (68 °F)
NG Go to step 3.
PREPARATION:
(a) Connect the transmission wire connector.
(b) Remove the ECM hood.
(c) Disconnect the connector from ECM.
CHECK:
Measure resistance between terminals DSL and E1 of ECM.
OK:
Resistance: 11 to 15 Ω at 20 °C (68 °F)
NG Repair or replace the harness or connector
(See page IN−30).
944