Moving Rear (Right) Wheels Into Field Position - MacDon FlexDraper FD1 Series Operator's Manual

7. Lift the wheel assembly to the desired height and slide
the linkage (A) into the appropriate slot in the vertical
support.
8. Push down on the handle (B) to lock.

Moving Rear (Right) Wheels into Field Position

1. Pull pin (A) on the left rear wheel. Swivel the wheel
clockwise and lock with pin.
2. Remove pin (A) and store at location (B).
3. Pull handle (C) upwards to release.
4. Lift the wheel to the desired height, and engage the
support channel into slot (D) in the vertical support.
5. Push down on handle (C) to lock.
214683
OPERATION
Figure 3.522: Front Wheels
Figure 3.523: Rear Wheel – Left Side
Figure 3.524: Rear Wheel – Left Side
296
A
B
A
B
D
C
A
Revision A