Float Module Stripper Bars And Feed Deflectors; Removing Stripper Bars - MacDon FlexDraper FD1 Series Operator's Manual

5.13 Float Module Stripper Bars and Feed Deflectors

5.13.1 Removing Stripper Bars

1. Detach the header from the combine. Refer to
Attachment/Detachment, page
2. Remove the four bolts and nuts (A) securing the
stripper bar (B) to the float module frame, and remove
the stripper bar.
3. Repeat at the opposite side.
214683
MAINTENANCE AND SERVICING
4 Header
307.
482
Figure 5.178: Stripper Bar
A
B
Revision A