11. Push the handle (A) on the float module receptacle to
the closed position until the lock button (B) snaps out.
Close the cover.
12. Lift the lever (A) and pull and lower the handle (B) to
disengage the feeder house/float module lock (C).
13. Lower the feeder house until it disengages the float
module support.
14. Back the combine away slowly from the float module.
214683
HEADER ATTACHMENT/DETACHMENT
339
B
Figure 4.65: Float Module Receptacle
C
Figure 4.66: Feeder House Locks
A
B
A
Revision A