Float Module Setup; Using Auger Flighting; Using Stripper Bars - MacDon FlexDraper FD1 Series Operator's Manual

Combine header

Hide thumbs Also See for FlexDraper FD1 Series:

Table of Contents

HEADER ATTACHMENT/DETACHMENT

4.2 Float Module Setup

The following sections outline the recommended float module setup guidelines for your specific combine model and

crop type; however, the recommendations cannot cover all conditions.

If feeding problems develop with the float module, refer to

7 Troubleshooting, page

The auger flighting on the FM100 can be configured for specific combines and crop conditions. Refer to

Module Feed Auger Configurations, page 307

for combine/crop specific configurations.

Stripper bar kits may have been supplied with your header to improve feeding in certain crops such as rice. They

are NOT recommended in cereal crops.

For servicing information, refer to

5.13 Float Module Stripper Bars and Feed Deflectors, page