4. Highlight the REEL HEIGHT icon (A), and press control
knob to select it.
5. Select LEARNING END STOPS (B) from the list.
6. Use control knob (A) to highlight the screwdriver
icon (B).
7. Press control knob and a progress bar chart (A) will
appear.
8. Follow the prompts on the screen to raise the reel.
9. Follow the prompts on the screen to lower the reel.
214683
OPERATION
Figure 3.452: CLAAS Combine Display and
Console
Figure 3.453: CLAAS Combine Display,
Console, and Control Handle
Figure 3.454: CLAAS Combine Display,
Console, and Control Handle
259
A
B
B
A
A
Revision A