Extended Center Filler; Rock Retarder; Stub Guard Conversion Kit - MacDon FlexDraper FD1 Series Operator's Manual

Combine header

Hide thumbs Also See for FlexDraper FD1 Series:

Table of Contents

6.3.3 Extended Center Filler

The Extended Center Filler kit (MD #B6450) includes a

reinforced flap 3 mm (1/8 in.) thick that extends onto the

feed draper of a MacDon FM100 Float Module to help

reduce loss when cutting crops such as beans and peas.

Installation instructions are included with the kit.

The rock retarder (A) consists of a steel angle that is bolted

to the cutterbar immediately aft of the knife, and helps

prevent rocks and large debris from being swept onto the

drapers with the crop. Installation instructions are included

with the kit.

Order bundles by header size:

9.1–10.7 m (30–35 ft.) – MD #B5084

12.2–13.7 m (40–45 ft.) – MD #B5085

Stub guards, complete with top guides and adjuster shoes,

are designed to cut tough crops.

Installation and adjustment instructions are included in

Order one of the following bundles according to your

header size:

4.6 m (15 ft.) – MD #B5009

6.1 m (20 ft.) – MD #B5010

7.6 m (25 ft.) – MD #B5011

9.1 m (30 ft.) – MD #B5012

10.7 m (35 ft.) – MD #B5013

OPTIONS AND ATTACHMENTS

Figure 6.9: Extended Filler

Figure 6.10: Rock Retarder

Figure 6.11: Stub Guards