Adjusting Auto Reel Speed (Claas 500 Series) - MacDon FlexDraper FD1 Series Operator's Manual

Adjusting Auto Reel Speed (CLAAS 500 Series)

The preset reel speed can be set when the automatic header functions are activated.
NOTE:
Changes may have been made to the combine controls or display since this document was published. Refer to the
combine operator's manual for updates.
1. Use the < or > key to select REEL WINDOW. Window
E15 will display the current advance or retard speed of
the reel in relation to the ground speed.
2. Press the OK key (C) to open the REEL SPEED
window.
3. Use the – key (A) or the + key (B) to set the reel speed
in relation to the current ground speed. Window E15 will
display the selected reel speed.
214683
OPERATION
Figure 3.428: CLAAS Combine Display
A
Figure 3.429: CLAAS Combine Controls
248
C
B
Revision A