MacDon FlexDraper FD1 Series Operator's Manual page 548

5. Lift end of reel endshield (A) off support (B).
6. Remove the reel endshield from the supports.
7. Remove the reel endshield (A) from support (B).
8. Install new reel endshield (C) onto support (B).
9. Reattach reel endshield (A) onto support (B), ensuring it
is installed on top of reel endshield (C).
10. Reinstall bolts (D).
11. Tighten all hardware.
214683
MAINTENANCE AND SERVICING
Figure 5.269: Reel Endshields
Figure 5.270: Reel Endshields
Figure 5.271: Reel Endshields
524
B
C
B
D
A
A
Revision A