Checking Axle Bolt Torque - MacDon FlexDraper FD1 Series Operator's Manual

Combine header

Hide thumbs Also See for FlexDraper FD1 Series:

Table of Contents

5.17.2 Checking Axle Bolt Torque

If a transport system is installed, adhere to the following procedure for torquing the axle bolts:

To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key

before making adjustments to machine.

Figure 5.309: Axle Bolts

1. Check and tighten axle bolts DAILY until torque is maintained as follows:

(A): 244 Nm (180 lbf·ft)

(B): 203 Nm (150 lbf·ft)

(C): 244 Nm (180 lbf·ft)

MAINTENANCE AND SERVICING