6.2.3 Lodged Crop Reel Finger Kit
The steel fingers (A) provided in the Lodged Crop Reel
Finger kit attach to the ends of every other tine bar and help
to clear material in heavy, hard-to-cut crops such as
lodged rice.
Each kit contains three fingers for the cam end of the reel
and three fingers for the tail end. Hardware and installation
instructions are included in the kit.
MD #B4831
6.2.4 PR15 Tine Tube Reel Conversion Kit
These kits allow conversion from a six-bat reel to a nine-bat reel and conversion from a five-bat reel to a
six-bat reel.
Order the following bundles according to your header size and type:
Five-bat to six-bat reels:
•
9.1 m (30 ft.) – Plastic Fingers MD #B6344
•
10.7 m (35 ft.) – Plastic Fingers MD #B6345
Six-bat to nine-bat reels:
•
9.1 m (30 ft.) – Plastic Fingers MD #B6347
NOTE:
You must also order additional endshields when converting the reel.
6.2.5 Reel Endshield Kit
The steel shields provided in the reel endshield kit attach to
the ends of the reels and help to clear material in heavy,
hard-to-cut crops. They are standard equipment on all
headers (except those with nine-bat reels). Hardware and
installation instructions are included in the kit.
See your MacDon Dealer for more information.
214683
OPTIONS AND ATTACHMENTS
Figure 6.4: Lodged Crop Fingers
Figure 6.5: Reel Endshields
547
A
Revision A