Installing Driveline Guard - MacDon FlexDraper FD1 Series Operator's Manual

5.6.4 Installing Driveline Guard

1. Slide the guard onto the driveline, and line up the
slotted lug on the locking ring (A) with the arrow (B) on
the guard.
2. Push the guard onto the ring until the locking ring is
visible in the slots (A).
3. Use a slotted screwdriver to rotate ring (A) clockwise
and lock ring in guard.
214683
MAINTENANCE AND SERVICING
Figure 5.41: Driveline Guard
Figure 5.42: Driveline Guard
Figure 5.43: Driveline Guard
416
A
B
A
A
Revision A