MacDon FlexDraper FD1 Series Operator's Manual page 332

To convert to Narrow configuration from Medium or Wide configuration, refer to
Medium Configuration or Wide Configuration to Narrow Configuration, page
To convert to Narrow configuration from Ultra Narrow configuration, refer to
Ultra Narrow Configuration to Narrow Configuration, page
Medium configuration is a standard configuration for the
following combines:
•
Case (5/6/7088, 7/8010, 7/8/9120, 5/6/7130, 7/8/9230,
5/6/7140, 7/8/9240)
•
Challenger (66/67/680B, 54/560C, 54/560E)
•
CLAAS (56/57/58/590R, 57/58/595R,
62/63/64/65/66/670, 73/74/75/76/77/780)
•
John Deere (95/96/97/9860, 95/96/97/9870,
S65/66/67/68/690, T670)
•
Massey Ferguson (96/97/9895, 9520/40/60,
9545/65, 9380)
•
New Holland CR (970/980, 9070/9080, 8090/9090,
X.90, X.80)
•
New Holland CX (8X0, 80X0, 8.X0, 8080/8090
Elevation)
•
Versatile (RT490)
To convert to Medium configuration from Narrow or Ultra Narrow configuration, refer to
from Ultra Narrow Configuration or Narrow Configuration to Medium Configuration, page
To convert to Medium configuration from Wide configuration, refer to
Configuration to Medium Configuration, page
214683
HEADER ATTACHMENT/DETACHMENT
317.
313.
308
4.1.3 Converting from
315.
4.1.4 Converting from
A
B
Figure 4.2: Medium Configuration (Rear View)
A - 410 mm (16-1/8 in.)
NOTE:
Dimensions are the same for both ends of the
auger. They should be within 15 mm (9/16 in.) of
the numbers given.
4.1.2 Converting from Wide
B - 260 mm (10-1/4 in.)
4.1.1 Converting
310.
Revision A