Setting Maximum Work Height (New Holland Cr Series) - MacDon FlexDraper FD1 Series Operator's Manual

Setting Maximum Work Height (New Holland CR Series)

NOTE:
This section applies only to 2015 and later CR models (6.80, 6.90, 7.90, 8.90, 9.90, and 10.90). For other pre-2015
New Holland combine models, refer to
page 261.
1. Select TOOLBOX (A) on the main screen. The
TOOLBOX screen displays.
2. Select FEEDER (A). The FEEDER SETUP screen
displays.
3. Select the MAXIMUM WORK HEIGHT field (B).
4. Set MAXIMUM WORK HEIGHT to desired value.
5. Press SET and then press ENTER.
214683
OPERATION
3.8.15 New Holland Combines (CR/CX Series—Pre-2015 Model Year),
283
Figure 3.504: New Holland Combine Display
Figure 3.505: New Holland Combine Display
Figure 3.506: New Holland Combine Display
A
B
A
Revision A