MacDon FlexDraper FD1 Series Operator's Manual page 209

3. Touch the HEADER CONFIGURATION field (A).
A screen showing predefined headers opens.
•
If your MacDon header is already set up, it appears
on the header list. Touch the MacDon header
title (B) to highlight the selection in blue, and then
touch the green check mark (E) to continue.
•
If only the default header (D) is shown, touch the
ABC button (C), and use the on-screen keyboard to
enter the MacDon header information. When
complete, select one of the following options to
return to the HEADER SETTINGS screen:
– The green check mark (E) saves the settings
– The garbage can icon (F) deletes the highlighted
header from the list
– The red X (G) cancels the change(s)
214683
OPERATION
D
B
E
Figure 3.282: Header Configuration Menu on
Header Settings Page
185
A
G
F
E C
Revision A