MacDon FlexDraper FD1 Series Operator's Manual page 374

12. Detach safety chain (C) from support bracket (B)
13. Pull collar (D) back to release driveline (A) from support
bracket. Remove the driveline from the support bracket.
14. Pull back the collar (A) on the end of the driveline, and
push the driveline onto the combine output shaft (B)
until the collar locks.
214683
HEADER ATTACHMENT/DETACHMENT
350
A
Figure 4.91: Driveline
A
Figure 4.92: Driveline
D
B
C
B
Revision A