MacDon FlexDraper FD1 Series Operator's Manual page 466

1. Position tool (A) as shown, and pull up to adjust the
guard tips upwards.
2. Position tool (A) as shown, and push down to adjust the
guard tips downwards.
NOTE:
If material is tough to cut, install stub guards with top
guard and adjuster plate. A kit is available from your
MacDon Dealer. Refer to
Kit, page 550.
214683
MAINTENANCE AND SERVICING
6.3.5 Stub Guard Conversion
A
Figure 5.93: Upward Adjustment
Figure 5.94: Downward Adjustment
442
A
Revision A