MacDon FlexDraper FD1 Series Operator's Manual page 252

1. Place header off the ground 15–25 cm (6–10 in.).
2. Press the DIAGNOSTIC icon (A) on the main screen of
the monitor. The CALIBRATION screen displays.
3. Select the CALIBRATIONS drop-down menu (A) to view
the list of calibration options.
4. Scroll through the list of options and select REEL
POSITION.
5. Press the ENTER icon (B).
6. Follow the instructions that appear on the screen.
As you proceed through the calibration process, the
display will automatically update to show the next step.
This calibration requires you to use the reel raise (A)
and reel lower (B) switches on the control handle.
214683
OPERATION
Figure 3.380: John Deere Combine Display
Figure 3.381: John Deere Combine Display
A
Figure 3.382: John Deere Control Handle
228
A
A
B
B
Revision A