MacDon FlexDraper FD1 Series Operator's Manual page 495

7. Move the drive roller cover plate (A) to the left.
8. Slide drive roller (A) with bearing assembly (B) to the
right until left end comes off of spline.
9. Lift left end out of the frame.
10. Slide assembly (A) to the left, guiding bearing
housing (B) through frame opening (C).
11. Remove roller (A).
214683
MAINTENANCE AND SERVICING
Figure 5.151: Drive Roller
Figure 5.152: Drive Roller
Figure 5.153: Drive Roller
471
A
A
A
B
B
C
Revision A