Disengaging Reel Safety Props - MacDon FlexDraper FD1 Series Operator's Manual

4. Use handle (A) to move lock rod to inboard position (B),
which engages pin (C) under prop.
5. Lower reel until safety props contact the outer arm
cylinder mounts and the center arm pins.

Disengaging Reel Safety Props

1. Raise the reel to maximum height.
2. Move the reel safety props (A) back inside the
reel arms.
214683
OPERATION
Figure 3.4: Reel Safety Prop – Center Arm
Figure 3.5: Reel Safety Prop – Left Side Shown
(Right Opposite)
32
A
B
A
C
Revision A