MacDon FlexDraper FD1 Series Operator's Manual page 215

Combine header

Hide thumbs Also See for FlexDraper FD1 Series:

Table of Contents

4. Header Offsets (A): Offset distances are important for

yield mapping. There are two adjustable dimensions on

the HEADER SETTINGS screen:

Header Lateral Offset: the distance between the

centerline of the header and the centerline of the

machine. This should be set at 0 for a MacDon

Feeder House to Cutter: the distance from the

machine interface to the cutterbar. This should be

set at 68 for a MacDon header.

Figure 3.296: MacDon Header Settings Inputs

Figure 3.295: Header Offset Settings

Troubleshooting