3. Use handle (B) to move lock rod (A) to the
outboard position.
3.2.3 Endshields
A hinged, polyethylene endshield is fitted on each end of the header.
Opening Endshields
1. Push release lever (A) located on the backside of the
endshield to unlock the shield.
2. Pull endshield open using handle depression (B).
3. Pull endshield at handle depression (A). Endshield is
retained by a hinge tab (B) and will open in
direction (C).
214683
OPERATION
Figure 3.6: Reel Safety Prop – Center Arm
A
Figure 3.7: Left Endshield
B
Figure 3.8: Left Endshield
33
A
B
A
B
C
Revision A